Currently, on the market there are many types of water-resistant wooden floors, but also can not avoid the harmful effects of water impact on the long term. To let you know how to prevent in cases of wooden floors flooded. We will guide you How to handle quickly flooded wooden floors
1 – In case of some water spilled on wooden floor surface
In the case of a little water spilled on the surface of laminate flooring, the first few hours will not be much affected yet. This is the simplest case, so the handling is also very simple. Use a dry cloth to wipe the surface of the water, then open the fan to dry the floor surface.
2 – Where the water spilled into a puddle for a long time
This situation can be caused by water from air-conditioners, air conditioners, refrigerators, etc., permeating the wooden floor in a discreet, difficult place to clean, so we do not know. Stagnant water on the surface of the wooden floor will penetrate inside the structure of the wooden floor. When the water is absorbed for a long time, the alley area connecting the pieces of wood will be absorbed first. The juxtaposition between the slats in the waterlogged area will inflate, causing loss of aesthetics, and in the long run may affect the adjacent wooden slats.
The solution to this case is as follows:
- In case of new wooden floor flooded, no blistering phenomenon. Just wipe and dry the location of that wooden floor.
- In the case of wood floors have blistering phenomenon. Cut out the bulging wooden floor and replace it with another piece of wooden floor. Industrial wood flooring with wedges very tight. So the wood you add will still not lose the overall aesthetic of the floor surface. However, in that position the link between the wooden slats will be weak because the new wood you have to stick will have to leave a lock to replace it even though you have used extra glue to link.
3 – In case the laminate flooring is flooded for a long time
In case the laminate flooring is too flooded and for a long time. Wooden floors tend to blister severely, extremely loss of aesthetics of the floor surface.
The solution to this case is as follows:
Step 1: Remove the wooden slats in the flooded industrial wood flooring
First, remove the bottom part of wool with a hammer. This is a wooden slat that runs around the upper wall of a wooden floor surface. Then, hammer the first piece of wood from the edge of the foot of the wall, removing each bar one by one until the area is not flooded.
Step 2: Dry the industrial wooden sticks that have been submerged
We use a dry towel and wipe each piece of wood. Then, spread them to the areas to dry (to a dry, cool, windy place possible). However, absolutely do not expose to direct sunlight. Wait until the wooden slats dry up, then arrange them.
Step 3: Clean the floor surface
Clean and dry the floor surface. Check if there are any areas on the wooden floor that have been flooded but not yet removed?
Step 4: Check the area of water overflow into the house, thoroughly treat the cause of not overflow next time.
Step 5: Install the treated wood sticks to dry
In wooden bars deformed due to flooding, there will be bars that are warped and cannot be restored. In order not to lose the overall appearance of the laminate flooring after reinstallation, we should remove the warped or warped timber and keep only the timbers that are not deformed or too warped. Then call the laminate flooring company to get it processed as quickly as possible.
The above is our guide on How to handle flooded wooden floors. Depending on the degree of heavy flooding and deformation of the wooden floor that you can improvise. However, for cases of heavy flooding and deformed wooden floors, you should contact the professional wood flooring companies to handle, it is better.
Your wooden floor is flooded, the wooden floor is blistering, warping or shrinking, but you cannot repair it yourself because of lack of tools, inexperience, and hesitation if you do not contact the construction team. our Konigin wood floor.
Website: https://mdvietnamgo.com/
